2012 Subaru Tribeca Owner's Manual - Page 450
2012 Subaru Tribeca Manual
Page 450 highlights
Driving tips 8-15 ! To remove the crossbar 2. Carefully raise the crossbar from roof rails. ! To install the crossbar Front crossbar: Front crossbar has a 150 lbs (68 kg) load label on left-hand side. 1. Loosen and remove the T-30 torx head screw from the top of each crossbar end support. Loosen the lower clamps. ® 3. The crossbar with a 150 lbs (68 kg) load label attached onto it is the front crossbar. An arrow is marked on the back of the front crossbar for correct installation. Install the front crossbar so that the arrow faces the front of the vehicle. 1) T-25 torx® head screw 1. Make sure that the T-25 torx® head screw on the back of each crossbar end support is tightened correctly. 2. Before placing the crossbar on the roof rails, make sure that the T-30 torx® head screw is removed from the top of each crossbar end support. - CONTINUED -