2012 Subaru Tribeca Owner's Manual - Page 392
2012 Subaru Tribeca Manual
Page 392 highlights
Interior equipment 6-15 CAUTION . Be careful not to pinch your hand between the headrest and the cargo area cover when you recline the second-row seat. . Be careful not to scratch the rear gate stays while extending and rewinding the cover. Scratches on the stays could cause leakage of gas from the stays, which may result in their inability to hold the rear gate open. & To remove the cover 1. Rewind the cover. & To install the cover housing NOTE When the head restraint is adjusted at the rearmost position of the seat with the seatback leaned back, the head restraint comes in contact with the cargo area cover. In this case, raise the seatback before adjusting the head restraint. If the head restraint is correctly fixed in any of the lock positions, the head restraint does not contact the cargo area cover even when the seatback is reclined. 2. Pull either sleeve on the end of the cover housing to shorten the cover 's length. 3. Take it off the retainer. 1. Remove the cover at the cover housing retaining part using a flat-head screwdriver. 2. Pull either sleeve on the end of the cover housing to shorten the cover 's length. - CONTINUED -