2012 Subaru Tribeca Owner's Manual - Page 228

Seat, seatbelt and SRS airbags 1-41 ! To hook the top tether ! Second-row outboard seat CAUTION When the child restraint system is to be secured using the top tether, pass the top tether under the head restraint between the head restraint stay posts. 2. Confirm that there are no obstacles around the anchorages. 1. Remove the head restraint at the window-side seating position where the child restraint system has been installed with the lower anchorages or seatbelt; lift up the head restraint while pressing the release button. Store the head restraint in the cargo area. Avoid placing the head restraint in the passenger compartment to prevent it from being thrown around in the passenger compartment in a sudden stop or a sharp turn. 3. Fasten the top tether hook of the child restraint system to the appropriate upper anchorage. 4. Tighten the top tether securely. CAUTION Be sure to install the top tether with the head restraint raised to the highest position. If the head restraint is in any of the lower positions, the top tether will touch the head restraint and the resulting slack will prevent its secure installation. - CONTINUED -