2007 Suzuki Aerio Owner's Manual - Page 120

OTHER CONTROLS AND EQUIPMENT CAUTION When you move a seatback, make sure the belt webbing is hooked in the belt hangers so the seat belts are not caught by the seatback, seat hinge, or seat latch. This helps prevent damage to the belt system. 54G374 54G375 3) Lower the center head restraint fully before folding the rear right seatback. Refer to "Head Restraints" for details. 2) Pull the belt out from the holder and insert the connector latch plate into the connector so as to align the triangle marks until you hear a "click". WARNING 54G381 5) Pull up the knob on the top of each split seat and fold the seatback forward. To raise the rear seatback(s): 1) Lift the seatback up and push back until it locks into place. Make sure the detachable connector is securely latched and the webbing is not twisted. WARNING If you park your vehicle outdoors in direct sunlight or in hot weather, an exposed latch plate can get hot enough to burn you. Be careful not to touch a hot latch plate. WARNING 54G288 4) Hook the webbing of both outboard lapshoulder belt(s) in the belt hanger. When returning a rear seatback to the normal position, make sure the seatback is securely latched. 5-5