2007 Suzuki Aerio Owner's Manual - Page 40

BEFORE DRIVING Anchors and Tethers for Children.) The anchors are located where the rear of the seat cushion meets the bottom of the seatback. Their position is identified by a small round label affixed to the seatback as shown in the illustration. Install a LATCH-type child restraint system according to the instructions provided by the child restraint system manufacturer. After installing the child restraint system, try moving it in all directions, especially forward, to make sure the flexible straps or rigid connecting bars are securely latched to the anchors. NOTE: Although there are three second row seating positions, you cannot install three LATCH type child restraints in the second row seats. You can install one or two LATCH restraint(s). Be sure to install the LATCH type child restraint(s) in the outboard seating positions. If your LATCH restraint has flexible lower connecting straps, these general instructions apply: 1) If possible, fold the seatback rearward for easier installation. EXAMPLE EXAMPLE 65D340 3) Snap the strap hooks to the anchors. Take care not to pinch your fingers. 65D339 EXAMPLE 2) Place the child restraint in the second row seat, feeding the strap hooks through the slots in the seat cushion or the slots in the seatback bottom. 65D341 4) Return the seatback to the normal, upright position. Tighten the lower straps as described in the child restraint 2-27