2007 Suzuki Aerio Owner's Manual - Page 42

BEFORE DRIVING are partially hooked to the anchors. Use your hands to confirm the position. Installation-Child Restraint with Top Strap EXAMPLE EXAMPLE EXAMPLE 54G337 54G185 54G296 3) When routing the top strap, be sure to pass it between the head restraint and the rear seatback as shown. (Refer to "Head Restraints" section for details on how to raise or lower the head restraint.) 4) Make sure that cargo does not interfere with routing of the top strap. 5) Grasp the front of the child restraint and push the child restraint forcefully to latch the connecting bars. Make sure they are securely latched by trying to move the child restraint system in all directions, especially forward. 6) Return the seatback if folded. Attach the top tether strap, if applicable. WARNING The seatback should always be securely latched in a fairly upright position when any type of child seat is installed. An unlatched or reclined seatback will reduce the intended effectiveness of the child restraint system. Some child restraint systems require the use of a top strap. Top strap anchor brackets are provided in your vehicle at the locations shown in the illustrations. Install the child restraint system as follows: 1) Secure the child restraint on the rear seat using the procedure described above for securing a restraint system that does not require a top strap. 2) Hook the top strap to the anchor bracket and tighten the top strap according to the instructions provided by the child restraint system manufacturer. Be sure to attach the top strap to the corresponding anchor located directly behind the child restraint. 2-29