3Com 3812 Getting Started Guide - Page 40

40 CHAPTER 3: SETTING UP FOR MANAGEMENT Web Interface Each Switch has an internal set of web pages that allow you to manage Management the Switch using a Web browser remotely over an IP network (see Figure 15). Figure 15 Web interface management over the network Workstation Switch Connect over Network via web browser Refer to "Setting Up Web Interface Management" on page 42. SNMP Management You can manage a Switch using any network management workstation running the Simple Network Management Protocol (SNMP) as shown in Figure 16. For example, you can use the 3Com Network Supervisor software that is provided on the CD-ROM that accompanies your Switch. Figure 16 SNMP management over the network SNMP Network Management Workstation Connect over Network using SNMP Switch Setting Up Command Line Interface Management Refer to "Setting Up SNMP Management" on page 43. This section describes how you can set up command line interface management using a local console port connection or over the network.