3Com 3812 Getting Started Guide - Page 49
Solving Communication Problems, Error message indicating that the SFP transceiver is invalid - replacement
UPC - 662705470191
View all 3Com 3812 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Solving Communication Problems 49 Solving Communication Problems Error message indicating that the SFP transceiver is invalid The Switch has identified that the SFP does not meet the minimum requirements for the Switch and has disabled the port. To correct this problem, completely remove the SFP and replace it with a 3Com approved SFP. See ""Approved SFP Transceivers" on page 26. Error message indicating that the SFP transceiver is faulty To correct this problem, completely remove the SFP and then reinsert it. Alternatively, insert another identical SFP. If the problem persists, contact 3Com Technical Support. If you experience communication problems with the Switch, ensure that: ■ The Switch IP address has been configured. ■ If the Switch is separated from your management application by a router, ensure that the default gateway IP address within the Switch is the same as the IP address of the router. ■ The Switch's IP address has been entered correctly in your network management application (for example 3Com Network Supervisor). The following is an brief overview of IP addressing, and how to obtain a registered IP address. IP Addressing To be managed correctly, each device on your network (for example a Switch or Hub) must have a unique IP address. IP addresses have the format n.n.n.n where n is a decimal number between 0 and 255. An example IP address is 192.168.100.8. The IP address is split into two parts: ■ The first part ('192.168.100' in the example) identifies the network on which the device resides ■ The second part ('.8' in the example) identifies the device within the network The natural subnet mask for this example is 255.255.255.0. If your network has a connection to the external IP network, that is, you access the Internet, you must apply for a registered IP address.