3Com 3CR17561-91-US Getting Started Guide - Page 40
Removing an SFP Transceiver, Packing and Shipping the Switch 4500, Removing an SFP, Transceiver
UPC - 662705496238
View all 3Com 3CR17561-91-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
40 CHAPTER 2: INSTALLING THE SWITCH Removing an SFP If you wish to remove the transceiver (it is not necessary to power-down Transceiver your Switch): 1 Disconnect the cable from the transceiver. 2 Move the wire release lever downwards until it is pointing toward you. 3 Pull the wire release lever toward you to release the catch mechanism; the transceiver will then easily slide out. Packing and Shipping the Switch 4500 This section describes how to correctly package your Switch 4500 should you need to return the Switch to 3Com. WARNING: The unit should be packaged safely to ensure that you do not invalidate the repair. Follow these steps to ensure that you package your unit correctly: 1 Orientate your Switch so that the back panel is on the left side (looking down at the top of the unit) as shown in Figure 11. 2 Secure one of the polystyrene supports to the back panel side of the unit. Secure the other support to the front panel side of the unit. 3 Place the unit in the box with the back panel next to the cable packaging. Figure 11 Correct Orientation When Packing the Switch 4500 Polystyrene Supports Cable Packaging Back Panel Side of Unit 3Com Switch Unit Front Panel Side of Unit