3Com 3CR17561-91-US Getting Started Guide - Page 80
FTP (via a network port), vianetwork port
UPC - 662705496238
View all 3Com 3CR17561-91-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
80 CHAPTER 6: UPGRADING SOFTWARE To set the remaining Switches in the fabric to boot from the new software, replace unit1 with unit2 and so on for each Switch in the fabric. 2 To set the Switch to load the new bootrom firmware, enter: boot bootrom unit1>flash:/s3o002_012_000.btm To set the remaining Switches in the fabric to load the new bootrom firmware, replace unit1 with unit2 and so on for each Switch in the fabric. 3 You will now need to reboot the fabric for the changes to take effect. The Switch will upgrade the bootrom firmware and boot from the specified software .app file. The files that you have saved in the backup phase should be deleted once the upgrade has completed successfully. FTP To upgrade software to your Switch via FTP do the following: (via a network port) 1 Enter the following command from User View: ftp aaa.aaa.aaa.aaa (where aaa.aaa.aaa.aaa is the IP address of the FTP server) If the FTP server has been successfully located, the following information is displayed: Trying... Press CTRL+K to abort Connected Information on your FTP server is displayed, logon with your username and password. 2 To download the configuration file, enter: get 3ComOScfg.def The following information is displayed if the download has been successful: