3Com 3CR17561-91-US Getting Started Guide - Page 84
TFTP, and the following information is displayed to indicate the file is
![]() |
UPC - 662705496238
View all 3Com 3CR17561-91-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
84 CHAPTER 6: UPGRADING SOFTWARE TFTP To upgrade software to your Switch via TFTP, do the following: 1 From the Boot Menu, select option 1 (Download application file to flash) to display the following: 1. Set TFTP protocol parameter 2. Set FTP protocol parameter 3. Set XMODEM protocol parameter 0. Return to boot menu Enter your choice(0-3): 2 Select option 1 to display the following: Load File name: Switch IP address: Server IP address: 3 Enter the file name, Switch IP address and Server IP address to display the following: Are you sure to download file to flash? Yes or No(Y/N) 4 Enter y and the following information is displayed to indicate the file is downloading: Attached TCP/IP Interface to netdrv0 Attaching network interface lo0...done Loading.....done Free flash Space: 10456064 bytes Writing flash....done! Please input the file attribute (main/backup/none):none done! 5 Repeat steps 1 to 4 for each of the remaining files. FTP To upgrade software to your Switch via FTP, do the following: 1 From the Boot Menu, select option 1 (Download application file to flash) to display the following: 1. Set TFTP protocol parameter 2. Set FTP protocol parameter 3. Set XMODEM protocol parameter 0. Return to boot menu Enter your choice(0-3): 2 Select option 2 to display the following: Load File name: Switch IP address:
![](/manual_guide/products/3com-3cr1757191-getting-started-guide-3d824b5/84.png)