3Com 3CR17561-91-US Getting Started Guide - Page 43
Command Line Interface Management using SSH, Web Interface Management, SNMP Management
UPC - 662705496238
View all 3Com 3CR17561-91-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Methods of Managing a Switch 43 Command Line Interface Management using SSH The Switch 4500 supports Secure Shell version 2.0 (SSHv2.0), allowing secure access to the Command Line Interface of the Switch. If you use SSH to administer your Switch and the network traffic is intercepted, no passwords or configuration information will be visible in the data. To securely administer the Switch using the Command Line Interface you need a third party SSH client. Web Interface Each Switch has an internal set of web pages that allow you to manage Management the Switch using a Web browser remotely over an IP network (see Figure 14). Figure 14 Web Interface Management over the Network Workstation Switch Connect over Network via web browser Refer to "Setting Up Web Interface Management" on page 58. SNMP Management You can manage a Switch using any network management workstation running the Simple Network Management Protocol (SNMP) as shown in Figure 15. For example, you can use the 3Com Network Director software, available from the 3Com website. Figure 15 SNMP Management over the Network SNMP Network Management Workstation Switch Connect over Network using SNMP Refer to "Setting Up SNMP Management V1 or V2" on page 59.