3Com 3CR17561-91-US Getting Started Guide - Page 93
This unit operates under SELV Safety Extra Low Voltage, France and Peru only
UPC - 662705496238
View all 3Com 3CR17561-91-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Important Safety Information 93 U.S.A. and Canada United Kingdom only Europe only: ■ The cord set must be UL-approved and CSA certified. ■ The minimum specification for the flexible cord is: No. 18 AWG Type SV or SJ 3-conductor ■ The cord set must have a rated current capacity of at least 10A. ■ The attachment plug must be an earth-grounding type with a NEMA 5-15P (15A, 125V) or NEMA 6-15P (15A, 250V) configuration. ■ The supply plug must comply with BS1363 (3-pin 13 amp) and be fitted with a 5A fuse which complies with BS1362. ■ The mains cord must be or marked and be of type H03VVF3GO.75 (minimum). ■ The supply plug must comply with CEE 7/7 ("SCHUKO"). ■ The mains cord must be or marked and be of type H03VVF3GO.75 (minimum). Denmark Switzerland ■ The supply plug must comply with section 107-2-D1, standard DK2-1a or DK2-5a. ■ The supply plug must comply with SEV/ASE 1011. WARNING: The appliance coupler (the connector to the unit and not the wall plug) must have a configuration for mating with an EN60320/IEC320 appliance inlet. WARNING: The socket outlet must be near to the unit and easily accessible. WARNING: This unit operates under SELV (Safety Extra Low Voltage) conditions according to IEC 60950. The conditions are only maintained if the equipment to which it is connected also operates under SELV conditions. WARNING: France and Peru only: This unit cannot be powered from IT† supplies. If your supplies are of IT type, this unit must be powered by 230V (2P+T) via an isolation transformer ratio 1:1, with the secondary connection point labelled Neutral, connected directly to earth (ground). †Impédance à la terre.