3Com 3CR17561-91-US Getting Started Guide - Page 60
Pre-requisites, Default Users and Passwords
UPC - 662705496238
View all 3Com 3CR17561-91-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
60 CHAPTER 3: SETTING UP FOR MANAGEMENT Pre-requisites ■ Documentation supplied with the SNMP network management application software. The default read community string is public. To change this setting in System View, enter display snmp community. The default write community string is private. To change this setting in System View, enter display snmp community. To manage your Switch using an SNMP network management application, you need to specify SNMP community strings for the users defined on the Switch. You can do this using the command line interface system management snmp community command - refer to the command line interface section of the "SuperStack 4 Switch Command Reference Guide" for more information. SNMP V3 is on as default. All commands are in snmp menu in System View. Default Users and Passwords If you intend to manage the Switch using the web interface or the command line interface, or to change the default passwords, you need to log in with a valid user name and password. The Switch has three default user names, and each user name has a different password and level of access. These default users are listed in Table 16. CAUTION: To protect your Switch from unauthorized access, you must change all three default passwords as soon as possible, even if you do not intend to actively manage your Switch. Table 16 Default Users User Name monitor manager admin Default Password Access Level monitor monitor - the user can view all manageable parameters, except special/security features, but cannot change any manageable parameters manager manager - the user can access and change the operational parameters but not special/security features (no security - the user can access and change all manageable password) parameters