AIWA CX-NA30 Operating Instructions - Page 15
Programmed, Edit Recording
View all AIWA CX-NA30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
PROGRAMMED EDIT RECORDING 3,7,8,9 5 4,5 3,7,8,9 u Programmed edit function enables CD recording while checking the remaining time on each side of the tape as the tracks are programmed. EEn3 The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded from the beginning of either side. 1 Insert the tape into deck 2. Insert the tape with the side to be recorded on first facing out from the unit. 2 Press the CD button and load the disc(s). 3 Press the EDIT/CHECK button twice while pressing the SHIFT button on the remote control. "EDIT and "PRGM" lights up on the display. 4 Press the numbered buttons on the remote control to designate the tape length. 10 to 99 minutes can be specified. Tape length Maximum recording time for side A 6 Repeat step 5 for the rest of the tracks for side A,, A track whose playing time is longer than the remaining time cannot be programmed. Remaining time of side A 4 Total number of programmed tracks Programmed tracks 7 Press the EDIT/CHECK button while pressing the SHIFT button on the remote control to select side B and program the tracks for side B. After confirming B on the display, repeat step 5. 8 Press the EDIT/CHECK button while pressing the SHIFT button to select side A and press the @ REC/REC MUTE button to start recording. CD play and recording of edited tracks for the first side start simultaneously. When the last truck programmed for side A, deck 2 enters the recording stop mode. After entering the recording stop mode, go to step 9. 9 Press the EDIT/CHECK while pressing the SHIFT button on the remote control for recording olf the second side. B is displayed. 10 Turn over the tape in deck 2 and press the @ REC/REC MUTE button to start recording. Recording starts. To stop recording Press the u button. Recording and CD play stop simultaneously. To check the order of the programmed track numbers Before recording, press the EDIT/CHECK button while pressing the SHIFT button on the remote control to select side A or B, and press the + or - button repeatedly. Program number Tape side A (front side) 5 Press the one of the DISC DIRECT PLAY buttons to select a disc. Then, press the numbered buttons and the + 10 button on the remote control to program a track. Example: To select the 10th track of disc 2, press the DISC DIRECT PLAY 2 button, then press the + 10 and O buttons. Track number Programmed track numbers To change the program of each side Press the EDIT/CHECK button while pressing the SHIFT button on the remote control to select side A or B, and press the W CLEAR button to clear the program of the selected side. Then program tracks again. To clear the edit program Press the s button twice so that "EDIT disappears on the display. Recording is inhibited if the erasure prevention tab on either side of the tape is broken off. ENGLISH 1 't