AIWA CX-NA30 Operating Instructions - Page 19
Setting, The Sleep Timer
View all AIWA CX-NA30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
The duration for the timer-activated period can be set between 5 and 240 minutes in 5-minute steps, o If this step is not completed within 4 seconds, repeat from step 1, 5 Prepare the source. To listen to a CD, load the disc to be played first on tray 1. To listen to a tape, insert the tape into deck 1 or 2, To listen to the radio, tune in to a station. 6 Press the POWER button to turn the unit off after adjusting the volume and tone. @ remains on the display after the power is turned off (timer standby mode). SETTING THE SLEEP TIMER When the timer-on time is reached, the unit turns on and begins play with the selected source. The volume level is automatically set to 16 when the power is turned off with the volume level set to 17 or more. To check the specified time and source Press the TIMER button while pressing the SHIFT button. The timer-on time, the selected source name and the duration for the timer-activated period are displayed for 4 seconds. To cancel timer standby mode temporarily Press the TIMER button while pressing the SHIFT button repeatedly so that 0 or @REC disappears on the display. To restore the timer standby mode, press again to display ~ or OREC. Using the unit while the timer is set You can use the unit normally after setting the timer. Before turning off the power, repeat step 5 to prepare the source, and adjust the volume and tone. m c Timer playback and timer recording will not begin unless the power is turned off. q Connected equipment cannot be turned on and off by the builtin timer of this unit. Use an external timer. TIMER RECORDING Timer recording is applicable for TUNER and VI DEO/AUX (with an external timer) sources only. Press the TIMER button t!@x? while pressing the SHIFT button so that @REC appears on the display, and press the II SET button within 4 seconds. Repeat the steps shown above from step 2 and insert the tape to be recorded into deck 2 after step 5. u The unit can be turned off automatically at a specified time. To check the time remaining until the power is turned off Press the SLEEP button once while pressing the SHIFT button. The remaining time is displayed for 4 seconds. To cancel the sleep timer Press the SLEEP button twice while pressing the SHIFT button so that "SLEEP" on the display disappears. ENGLISH 18