AIWA CX-NA30 Operating Instructions - Page 9

BASIC OPERATIONS Use Type I (normal) tapes only, 1 Press the TAPE button and press the A EJECT mark to open the cassette holder. e,~~Q-lGz About cassette tapes q To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool. Side A Tab for side A 1P To record on the tape again, cover the tab openings with adhesive tape, etc. q 120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recommended. q Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the mechanism. .- - insert a tape with the exposed side down. Push the cassette holder to close. 2 Press the - button to s~art play. Only the side facing out from the unit can be played back. The selected deck number tape counter To select a playing deck When tapes are loaded in both decks, press the TAPE button first to select a deck. The selected deck number is displayed. To stop play, press the s button. To pause play (deck 2 only), press the II button. To resume play, press again, To fast forward or rewind, press the ~ or ~ button. Then press the s button to stop the tape, To start play when the power is off (Direct Play Function) Press the TAPE button. The power is turned on and play of the inserted tape begins; To set the tape counter to 0000 Press the s CLEAR button in stop mode. The counter is also set to 0000 when the cassette holder is opened. When tapes are loaded in both decks After playback on deck 1 finishes, the tape in the deck 2 will start to play without interruption. (Continuous play) 8 ENGLISH