ASRock N100M Software/BIOS Setup Guide - Page 44
Front Panel, Onboard HDMI HD Audio, Onboard WAN Device, Deep Sleep, Restore on AC/Power Loss, Turn
View all ASRock N100M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Configuration options: [Auto] [Enabled] [Disabled] Front Panel Allows you to select Front Panel type. [HD] sets the front panel audio connector mode to high definition audio. [AC 97] sets the front panel audio connector mode to legacy AC'97.] Onboard HDMI HD Audio Allows you to enable or disable audio for the onboard digital outputs. This item appears when you've installed a graphics card on your motherboard. Configuration options: [Enabled] [Disabled]. Onboard WAN Device Allows you to enable or disable the onboard WAN device. Configuration options: [Enabled] [Disabled]. Deep Sleep Allows you to configure deep sleep mode for power saving when the computer is shut down. We recommend disabling Deep Sleep for better system compatibility and stability. Configuration options: [Enabled] [Enabled in S5] [Enabled in S4-S5] Restore on AC/Power Loss Allows you to select the power state after a power failure. [Power Off] sets the power to remain off when the power recovers. [Power On] sets the system to start to boot up when the power recovers. Turn On Onboard LED in S5 Allows you to turn on or off the Onboard LED in the ACPI S5 state. Configuration options: [Enabled] [Disabled] Restore Onboard LED Default Allows you to restore Onboard LED default value. Configuration options: [Disabled] [Apply] 40