Adaptec AAA-UDMA Hardware Guide - Page 17
Installing DIMM Memory, supported. See the Adaptec Web Site
View all Adaptec AAA-UDMA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Installing the Hardware Installing DIMM Memory Before you can use the AAA-UDMA, the DIMM memory socket must be populated with a DIMM, as shown in Figure 2-2. In most cases, the AAA-UDMA comes pre-installed with a DIMM. If a DIMM is not pre-installed, a non-buffered 60 ns (or faster), 3.3V, ECC, 168-pin EDO DIMM can be used. A DIMM of up to 64 MB is supported. (See the Adaptec Web Site at http://www.adaptec.com/tools/compatibility/u2dimm.html for a list of approved DIMMs and vendors.) 168-pin DIMM DIMM Socket Figure 2-2. Installing DIMM in the DIMM Socket 2-3
2-3
Installing the Hardware
Installing DIMM Memory
Before you can use the AAA-UDMA, the DIMM memory socket
must be populated with a DIMM, as shown in Figure 2-2.
In most cases, the AAA-UDMA comes pre-installed with a DIMM. If
a DIMM is not pre-installed, a non-buffered 60 ns (or faster), 3.3V,
ECC, 168-pin EDO DIMM can be used. A DIMM of up to 64 MB is
supported. (See the Adaptec Web Site at
for a list of
approved DIMMs and vendors.)
Figure 2-2. Installing DIMM in the DIMM Socket
168-pin DIMM
DIMM Socket