Adaptec AAA-UDMA Hardware Guide - Page 50
Installing the Array1000UDMA Driver for Novell NetWare, Installing the Driver When Installing NetWare
View all Adaptec AAA-UDMA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
AAA-UDMA Installation and Hardware Guide Installing the Array1000UDMA Driver for Novell NetWare To begin driver installation, see either Installing the Driver When Installing NetWare on page 6-2, or Installing the Driver When NetWare is Already Installed on page 6-6. Note: We recommend that you install your Novell NetWare operating system on a fault-tolerant array (RAID 1, 0/1, or 5) to take advantage of the redundancy and performance features of the array. Installing the Driver When Installing NetWare To install the cdaudmah.ham driver when you are installing NetWare, follow the instructions below for the version of NetWare you are installing. NetWare 4.11 Follow these instructions only if you are installing NetWare 4.11 for the first time: 1 Create a DOS partition and install DOS on your system. 2 Edit the autoexec.bat file to include a command line for mscdex.exe (the mscdex.exe file is included with MS-DOS 6.x and above). The following sample command lines for the autoexec.bat file are appropriate for most systems: c:\dos\mscdex.exe /M:12 (This assigns the CD-ROM the next available drive letter, typically D if there is only one DOS drive.) 3 Reboot the system to the DOS partition. 4 Insert the NetWare CD in your CD-ROM drive. 5 Go to the CD-ROM drive. 6 Type Install and press Enter. 7 Follow the procedures in your NetWare documentation for installing a new server. 6-2