Alpine 9861 Owners Manual - Page 35

Setting the Tuning Method You can set the tuning method. You can select the received stations in channel No. order or in channel name order (alphabetic order). To customers using the SIRIUS Tuner Box: For details about functions, refer to the SIRIUS Tuner Box Owner's Manual. 1 Press MENU to select the SETUP mode, then press MODE. 2 Press or to select "CH SELECT," then press MODE. 3 Turn the Rotary encoder to set the tuning method. CH No.: ALPHABET: Set in order of channel No. Set in alphabetic order. 4 Press MENU to select RETURN. After 2 seconds, the unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode. • When the setting is completed, switch the channel DOWN/UP by pressing the or . Storing Channel Presets 1 Press BAND to select the desired band you want to store. 2 After tuning in the desired channel, press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the channel. The selected station is stored. 3 Repeat the procedure to store up to 5 other channels onto the same band. • To use this procedure for other bands, simply select the band desired and repeat the procedure. • A total of 18 channels can be stored in the preset memory (6 channels for each band; XM1, XM2 and XM3 or SR1, SR2 and SR3). • If you store a channel in a preset memory which already has a station, the current channel will be cleared and replaced with the new one. Channel/Category Search Function You can search for programs by Channel No. or Category. 1 Press in the XM or SIRIUS mode. 2 Turn the Rotary encoder to select Channel Search mode or Category Search mode, then press . Category Search mode: 3 Turn the Rotary encoder to select the desired Category, then press . 4 Turn the Rotary encoder to select the desired Channel No. or Channel Name, then press MODE. • Search items vary depending on the setting in "Setting the Tuning Method" (page 33). When "CH NO" is selected: Channel No. Search When "ALPHABET" is selected: Channel Name Search • While in Category Search mode, press FUNC. to return to the selecting search mode. • The Search mode is canceled if you press and hold for at least 2 seconds, or no operation is performed for 10 seconds in Category Search mode. Channel Search mode: 3 Turn the Rotary encoder to select the desired Channel No. or Channel Name, then press MODE. • Search items vary depending on the setting in "Setting the Tuning Method" (page 33). When "CH NO" is selected: Channel No. Search When "ALPHABET" is selected: Channel Name Search • While in Channel Search mode, press or to select another Category. • While in Channel Search mode, press FUNC. to rerurn to the selecting search mode. • The Search mode is canceled if you press and hold for at least 2 seconds, or no operation is performed for 10 seconds in Channel Search mode, Receiving Stored Channels 1 Press BAND to select the desired band. 2 Press the channel preset button that has your desired satellite channel in memory. 33-EN