Alpine CDE-HD148BT User Manual - Page 14

CD/MP3/WMA/AAC Rotary encoder /ENTER   SOURCE  5  4 Preset buttons (1 through 6) • The playback time may not be correctly displayed when a VBR (Variable Bit Rate) recorded file is played back. Repeat Play 1 Press z 4. The song is played back repeatedly. REPEAT ONE*1  REPEAT FOLDER*2  REPEAT OFF  REPEAT ONE *1 Only a track is repeatedly played back. *2 Only files in a folder are repeatedly played back. (MP3/WMA/ AAC mode only) 2 To cancel repeat play, select (REPEAT OFF) with the above procedure. Note • a indicator lights up during repeat play mode. Playback The following table shows which discs can be played on which models. CDE-HD148BT CDE-147BT CD CD-TEXT MP3 WMA AAC         1 Insert a disc with the label side facing up. The disc will be pulled into the unit automatically. M.I.X. (Random Play) 1 Press 5x. The songs are played back in random sequence. MIX FOLDER*1  MIX ALL*2  MIX OFF  MIX FOLDER *1 Only files in a folder are played back in random sequence. (MP3/WMA/AAC mode only) *2 The tracks/files are played back in random sequence. 2 To cancel M.I.X. play, select (MIX OFF) with the above procedure. Note • s indicator lights up during random play mode. Searching for CD Text Note • When a disc is already inserted, press VSOURCE to switch to the DISC mode. 2 While playing back MP3/WMA/AAC, press  or  to select the desired folder. 3 Press  or  to select the desired track (file). Pressing and holding  or  will fast backward/fast forward track continuously. 4 To pause playback, press . Pressing  again will resume playback. 5 To eject the disc, press . Notes • Do not remove a CD during its eject cycle. Do not load more than one disc at a time. A malfunction may result from doing either. • The "" indicator lights up when a disc is inserted. • Three-inch (8 cm) CDs can not be used. • Any file protected by DRM (Digital Rights Management) copy protection, cannot be played back on this unit. • The track display for MP3/WMA/AAC data playback is the file numbers recorded on the disc. On discs utilizing CD Text, songs can be searched and played by using their recorded titles. For discs without CD Text, searches are made using the track numbers associated with each song. 1 Press ENTER during play. 2 Turn the Rotary encoder to select the desired track, and then press ENTER. This will play the selected track. Notes • If any one of the preset buttons (1 through 6) is pressed in the search mode, a search can be made quickly by skipping to the specified location. For details, refer to "Direct Search Function" on page 39. • Press t in the search mode to cancel. Or, the search mode is canceled if no operation is performed for 60 seconds. • When CD Text Search is made during M.I.X. play, the M.I.X. play mode will be canceled. 14-EN