Alpine IVA D310 Owners Manual - Page 44

Recalling the Stored Adjusting Contents Following operation is performed after Step 3 above. 4 Touch any one of [P.SET 1] to [P.SET 6] on the BASS ENGINE screen. The stored adjusting contents will be recalled. Subwoofer On and Off Setting item: SUBWOOFER Setting contents: OFF / 0° / 180° OFF: Subwoofer output is off. 0°: Subwoofer output is on, and the phase is 0°. 180°: Subwoofer output is on, and the phase is 180°. • The setting of "Subwoofer On and Off" can be stored in the preset buttons (1 through 6). VISUAL EQ™ Visual EQ Setting Operation The following steps 1 to 6 are common operations to each "Setting item" of VISUAL EQ setting. Refer to each section for details 1 Touch [SETUP] on the main source screen. The SETUP selection screen is displayed. 2 Touch [i-Personalize]. The i-Personalize setup screen appears. 3 Touch [ ] of VISUAL EQ. VISUAL EQ screen appears. 4 Select a desired setting item by touching [ ] or [ ]. Setting items: VISUAL EQ* SHARP* BRIGHT COLOR* USER MEMORY* TINT* CONTRAST * The setting is available in the visual source mode. (except navigation screen) 5 Change the setting on the selected item by touching its [ ] or [ ]. 6 Touch [RETURN] to return to the previous screen. Touch [CONTROL] to return to the main source screen that was displayed before the setup operation was started. Selecting the VISUAL EQ Mode (Maker's setting) You can select a mode suitable for the subject image. Setting item: VISUAL EQ Setting contents: OFF (FLAT) / NIGHT M. / SOFT / SHARP / CONTRAST / P-1 / P-2 OFF (FLAT): Initial Setting NIGHT M.: Suitable for movies in which dark scenes frequently appear. 42-EN SOFT: Suitable for CGs and animated films. SHARP: Suitable for old movies where images are not clearly shown. CONTRAST: Suitable for recent movies. P-1: Recalls the VISUAL EQ mode being stored on preset No.P-1 from "Storing VISUAL EQ" (page 43). P-2: Recalls the VISUAL EQ mode being saved on preset No.P-2 from "Storing VISUAL EQ" (page 43). • To return to the initial setting after selecting any one of the setting contents (NIGHT M. to CONTRAST) and adjusting a desired brightness, picture tint, etc., set this function to OFF. • If your desired brightness, picture tint, etc., are adjusted after selecting any one of the setting contents (NIGHT M. to CONTRAST), "CUSTOM" is displayed. Adjusting Brightness Setting item: BRIGHT Setting content: -15 ~ +15 You can adjust the brightness between MIN (-15) and MAX (+15). When it reaches the minimum or maximum point, the display shows "MIN" or "MAX" respectively. • When any NIGHT M. to CONTRAST setting item is selected, the brightness is automatically adjusted according to the car's interior brightness if AUTO is set in "Setting the Brightness of the Backlighting" (page 35). Adjusting Color of Picture Setting item: COLOR Setting content: -15 ~ +15 You can adjust the color between MIN (-15) and MAX (+15). When it reaches the minimum or maximum point, the display shows "MIN" or "MAX" respectively. • Color adjustment can be made only in the navigation, DVD, Video CD, AUX1 and AUX2 modes. • Color adjustment cannot be made if a Navigation system with the RGB feature is connected. Adjusting Tint of Picture Setting item: TINT Setting content: G15 ~ R15 Adjust the color from G15 to R15. "G MAX" or "R MAX" is displayed at the maximum of each color. • Tint adjustment can be made only in the navigation, DVD, Video CD, AUX1 and AUX2 modes. • Tint adjustment cannot be made if a Navigation system with the RGB feature is connected. Adjusting Image Contrast Setting item: CONTRAST Setting content: -15 to +15 Adjustment of contrast is done in the range of -15 to +15. "HIGH" and "LOW" appear as the maximum and minimum values specified. • When any NIGHT M. to CONTRAST setting item is selected, image contrast is automatically adjusted according to the car's interior brightness if AUTO is set in "Setting the Brightness of the Backlighting" (page 35).