Alpine IVA D310 Owners Manual - Page 76

Installing the Tuner Box Caution Do not block the unit's fan or heat sink, thus preventing air circulation. If blocked, heat will accumulate inside the unit and may cause a fire. Air ventilation hole 2 Install the tuner on the floor with the supplied flange- head tapping screws (M4 × 14). Flange-head tapping screws (M4 × 14) (Included) When mounting with Velcro fasteners When mounting the tuner with the Velcro fasteners, be sure to choose a flat location. Do not hang the unit from the bottom of the dashboard or rear deck with the Velcro fasteners. 1 Remove the Protective paper and attach two pieces of Velcro fastener to the bottom of the Tuner. Tuner Box Installing the DC/DC Converter Install the DC/DC Converter on the floor with the supplied flange-head tapping screws (M4 × 14). Flange-head tapping screws (M4 × 14) (Included) Tuner Box Protective paper Protective paper Velcro Fasteners (Included) 2 Check the position, and then fix the Tuner to the floor carpet. When mounting with Screws When mounting the tuner with the screws, be sure to choose a flat location. When making holes, be careful not to scratch any pipes or wires. 1 Connect the bracket to both the flanks of the tuner with the supplied pan screws (M4 × 8). Tuner Box DC/DC Converter Bracket (Included) Pan screws (M4 × 8) (Included) 74-EN