Arlo Pro 5 User Manual - Page 22
Set up an Arlo SecureLink connection between the Pro 5S 2K Camera and a Keypad Sensor Hub
View all Arlo Pro 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Pro 5S 2K Spotlight Camera Connect your iOS (Apple) device to a Wi-Fi network 1. Unlock your device and tap Settings. 2. Tap Wi-Fi, near the top of the list of Settings options. 3. Turn on Wi-Fi by tapping the switch next to Wi-Fi at the top. Note: Wi-Fi is activated when the switch is green. 4. Select the Wi-Fi network. 5. If prompted, enter the password for the network. When you're connected to the Wi-Fi network, a blue check mark appears to the left of the network name. Connect your Android device to a Wi-Fi network 1. Unlock your device and tap Settings. 2. Tap Network & internet > Wi-Fi. 3. Turn on Wi-Fi by tapping Use Wi-Fi at the top. 4. Select the Wi-Fi network. 5. If prompted, enter the password for the network. When you're connected to the Wi-Fi network, the word Connected appears under the network name. Set up an Arlo SecureLink connection between the Pro 5S 2K Camera and a Keypad Sensor Hub The Keypad Sensor Hub is part of the Arlo SmartHome Security System (sold separately). After your Pro 5S 2K Camera is set up and active, you can pair it to a Keypad Sensor Hub using Arlo SecureLink connectivity. Your Pro 5S 2K Camera and the Keypad Sensor Hub need to be under the same Arlo Secure Account and in the same location. The Arlo Pro 5S will also operate even if the Wi-Fi is down or during power outage if it is paired to a Arlo Keypad Sensor Hub equipped with a Cellular and Battery Backup. Note: Your Pro 5S 2K Camera cannot connect to both Arlo SmartHub or Base Station and a Keypad Hub at the same time. To change your Pro 5S 2K Camera connection from a SmartHub or Base Station to a Keypad Sensor Hub, you need to first connect the Pro 5S 2K Camera it directly to your router's Wi-Fi, and then pair the camera to the Keypad Sensor Hub. Wi-Fi Setup and Connections 22 User Manual