Arlo Pro 5 User Manual - Page 26
Move your camera’s Wi-Fi connection to a SmartHub or base station
View all Arlo Pro 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Pro 5S 2K Spotlight Camera The LEDs light as described in this table. VMB4000 LEDs Power internet Camera Color Solid green. The base station is powered on. Blinking green. A firmware update is in progress. DO NOT TURN OFF THE BASE STATION OR THE CAMERAS. Solid amber. The base station is booting. Solid green. The base station is connected to the internet. Blinking green. The base station is transmitting data. Solid amber. The base station is connected to the router, but it isn't connected to the internet. Solid green. A camera is connected to the base station. Blinking green. The base station is attempting to synch with a camera. Solid amber. A camera is too far from the base station. The signal strength is weak. Move your camera's Wi-Fi connection to a SmartHub or base station You can change your camera's Wi-Fi connection from your router to an Arlo SmartHub VMB5000 or VMB4540, or an Arlo base station VMB4500 or VMB4000. To add a SmartHub or base station and connect your camera: 1. Open the Arlo Secure App. 2. Add the SmartHub or base station to the same Arlo account that your camera was originally connected to. If you're using a trial Arlo subscription associated with this account, doing this keeps the trial active so you don't lose it. 3. Follow the Arlo Secure App instructions to set up your SmartHub or base station and connect it to the internet. 4. Tap Devices. 5. Select your camera. 6. Scroll down and tap Remove Device. Your device is reset and removed from your account. 7. From My Devices, tap Add New Device. 8. Follow the Arlo Secure App instructions to add the camera. 9. When the Arlo Secure App detects your SmartHub or base station, follow the instructions to connect your camera to your SmartHub or base station. Wi-Fi Setup and Connections 26 User Manual