Asus CUV4X-E CUV4X-E User Manual - Page 37
CPU Fan, Power Supply Fan, and Chassis Fan Connectors
UPC - 610839878079
View all Asus CUV4X-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
3. HARDWARE SETUP 6) CPU Fan, Power Supply Fan, and Chassis Fan Connectors (3-pin CPU_FAN/PWR_FAN/CHA_FAN) The three fan connectors support cooling fans of 350mA (4.2 Watts) or less. Orient the fans so that the heat sink fins allow airflow to go across the onboard heat sink(s) instead of the expansion slots. The fan wiring and plug may vary depending on the fan manufacturer. The red wire should be positive while the black should be ground. Connect the fan plug to the board taking into consideration the polarity of the connector. NOTE: Use the "Rotation" signal only with a specially designed fan with a rotation signal. The Rotations Per Minute (RPM) can be monitored using ASUS PC Probe (see 6. SOFTWARE REFERENCE). WARNING! The CPU and/or motherboard will overheat if there is no airflow across the CPU and onboard heatsinks. Damage may occur to the motherboard and/or the CPU fan if these pins are incorrectly used. These are not jumpers, do not place jumper caps over these pins. CUV4X-E ® CUV4X-E 12-Volt Cooling Fans PWR_FAN Rotation +12V GND CPU_FAN Rotation +12V GND CHA_FAN GND +12V Rotation 3. H/W SETUP Connectors ASUS CUV4X-E User's Manual 37