Asus CUV4X-E CUV4X-E User Manual - Page 38
ASUS CUV4X-E User's Manual, Chassis Intrusion Lead 4-1 pin CHASSIS, SMBus Connector 5-1 pin SMB
UPC - 610839878079
View all Asus CUV4X-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
3. H/W SETUP Connectors 3. HARDWARE SETUP 7) Chassis Intrusion Lead (4-1 pin CHASSIS) This lead is for a chassis designed for chassis intrusion detection. This requires an external detection mechanism such as a chassis intrusion monitor/sensor or microswitch. When any chassis component is removed, the sensor is triggered and a high-level signal is sent to this lead to record a chassis intrusion event.The event is then be processed by software such as LDCM. When not using the chassis intrusion lead, place a jumper cap over the pins to close the circuit. +5Volt (Power Supply Stand By) Chassis Signal Ground CUV4X-E ® 1 CHASSIS CUV4X-E Chassis Open Alarm Lead 8) SMBus Connector (5-1 pin SMB) This connector allows you to connect SMBus (System Management Bus) devices. SMBus devices communicate by means of the SMBus with an SMBus host and/ or other SMBus devices. SMBus is a specific implementation of an I2C bus, which is a multi-device bus; that is, multiple chips can be connected to the same bus and each one can act as a master by initiating data transfer. CUV4X-E ® CUV4X-E SMBus Connector SMB 1 SMBCLK Ground SMBDATA +5V 38 ASUS CUV4X-E User's Manual