Asus CUV4X-E CUV4X-E User Manual - Page 39
ASUS CUV4X-E User's Manual, Standard Infrared Module Connector 5-pin IR, UART2 Use Infrared, USB
UPC - 610839878079
View all Asus CUV4X-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
3. H/W SETUP Connectors 3. HARDWARE SETUP 9) Standard Infrared Module Connector (5-pin IR) This connector supports an optional wireless transmitting and receiving infrared module. This module mounts to a small opening on system cases that support this feature. You must also configure the setting through UART2 Use Infrared (see 4.4.2 I/O Device Configuration) to select whether UART2 is directed for use with COM2 or IrDA. Use the five pins as shown in Back View and connect a ribbon cable from the module to the motherboard SIR connector according to the pin definitions. Front View Back View IR +5V (NC) IRRX GND IRTX CUV4X-E 1 ® IRTX +5V GND (NC) IRRX CUV4X-E Infrared Module Connector 10) USB Header (10-1 pin USBPORT) If the USB port connectors on the back panel are inadequate, one USB header is available for two additional USB port connectors. Connect the USB header to a 2-port USB connector set and mount the bracket to an open slot in the chassis. (The USB connector set is optional and does not come with the motherboard package.) USBPORT 1 0 5 CUV4X-E ® NC GND USBP2+ USBP2USB Power GND USBP3+ USBP3USB Power 6 1 CUV4X-E Front Panel USB Header ASUS CUV4X-E User's Manual 39