Asus M4A88TD-M/USB3 User Manual - Page 50
This connector is for an additional Sony/Philips Digital Interface S/PDIF port. Connect - cpu support
View all Asus M4A88TD-M/USB3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
7. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. The S/PDIF module is purchased separately. 8. CPU and chassis fan connectors (4-pin CPU_FAN; 3-pin CHA_FAN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. Chapter 2 Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! • The CPU_FAN connector supports the CPU fan of maximum 2A (24 W) fan power. • Only the 4-pin CPU_FAN connector supports the ASUS Fan Xpert feature. 2-32 Chapter 2: Hardware information