Asus M4A88TD-M/USB3 User Manual - Page 84
Power menu
View all Asus M4A88TD-M/USB3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
USB Mass Storage Reset Delay [20 Sec] Sets the maximum time that the BIOS waits for the USB storage device to initialize. Configuration options: [10 Sec] [20 Sec] [30 Sec] [40 Sec] Emulation Type [Auto] Allows you to set the emulation type. Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CDROM] 3.7 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press to display the configuration options. Main Ai Tweaker M4A88TD-M/USB3 BIOS Setup Advanced Power Boot Tools Version 0205 Exit Power Settings Suspend Mode ACPI 2.0 Support ACPI APIC Support [Auto] [Enabled] [Enabled] Select the ACPI state used for System Suspend. APM Configuration HW Monitor Configuration Anti Surge Support [Enabled] NB Thermal Protect [Enabled] ←→ Select Screen ↑↓ Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2010, American Megatrends, Inc. 3.7.1 Suspend Mode [Auto] Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used for system suspend. [Auto] The system automatically configures the ACPI suspend mode. [S1 (POS) only] Sets the ACPI suspend mode to S1/POS (Power On Suspend). [S3 only] Sets the ACPI suspend mode to S3/STR (Suspend To RAM). 3.7.2 [Disabled] [Enabled] ACPI 2.0 Support [Enabled] The system will not add additional tables as per ACPI 2.0 specifications. The system adds additional tables as per ACPI 2.0 specifications. 3.7.3 [Disabled] [Enabled] ACPI APIC Support [Enabled] The system disables the Advanced Configuration and Power Interface (ACPI) support in the Advanced Programmable Interrupt Controller (APIC). The ACPI APIC table pointer is included in the RSDT pointer list. Chapter 3 3-28 Chapter 3: BIOS setup