Asus MAXIMUS VIII EXTREME User Guide - Page 108

DRAM Current Capability [100%] This item provides a total power range for DRAM overclocking. A higher value setting provides higher power consumption delivery and extends the overclocking frequency range simultaneously. Configuration options: [100%] [110%] [120%] [130%] Configure higher values when overclocking or under a high CPU loading for extra power support. DRAM Power Phase Control [Extreme] This item allows you to set the power phase control of the DRAM. Configuration options: [Optimized] [Extreme] DRAM Switching Frequency [Auto] This item affects the VRM transient response speed and the component thermal production. Select [Manual] to configure a higher frequency for a quicker transient response speed. Configuration options: [Auto] [Manual] DO NOT remove the thermal module. The thermal conditions should be monitored. The following item appears only when you set the DRAM Switching Frequency to [Manual]. Fixed DRAM Switching Frequency (KHz) [300] This item allows you to set a higher frequency for a quicker transient response speed. Use the or to adjust the value. The values range from 300 KHz to 500 KHz with an interval of 50 KHz. DO NOT remove the thermal module when the manual mode is selected. The thermal conditions should be monitored. Boot Voltages CPU Core/Cache Boot Voltage [Auto] The voltage for CPU at initial boot. Configuration options: [Auto] [0.600] - [1.700] DMI Boot Voltage [Auto] The voltage for DMI at initial boot. Configuration options: [Auto] [0.300] - [1.900] Core PLL Boot Voltage [Auto] The voltage for Core PLL at initial boot. Configuration options: [Auto] [0.70000] - [2.40000] Chapter 3 3-16 Chapter 3: BIOS Setup