Asus P2L-N P2L-N User Manual - Page 14

Installation Steps, Jumpers

Get Asus P2L-N PDF manuals and user guides View all Asus P2L-N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

III. INSTALLATION Jumpers III. INSTALLATION WARNING! Computer motherboards, baseboards and components, such as SCSI cards, contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Unplug your computer when working on the inside. 2. Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case. 3. Hold components by the edges and try not to touch the IC chips, leads or connectors, or other components. 4. Place components on a grounded antistatic pad or on the bag that came with the component whenever the components are separated from the system. Installation Steps Before using your computer, you must complete the following steps: 1. Set Jumpers on the Motherboard (if necessary) 2. Install System Memory Modules 3. Install the Central Processing Unit (CPU) 4. Install Expansion Cards 5. Connect Ribbon Cables, Cabinet Wires, and Power Supply 6. Setup the BIOS Software 1. Jumpers 1. Audio Setting (JP1) This jumper allows you to enable or disable the onboard audio. This is normally set to enable unless you add an audio expansion card in which case you would need to disable the onboard audio to prevent hardware conflicts. JP1 3 2 1 Audio Enable JP1 3 2 1 Audio Disable R P2E-N Onboard Audio Setting 14 ASUS P2L-N/P2E-N User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
14
ASUS P2L-N/P2E-N User’s Manual
Jumpers
III.
INSTALLATION
Installation Steps
Before using your computer, you must complete the following steps:
1.
Set Jumpers on the Motherboard (if necessary)
2.
Install System Memory Modules
3.
Install the Central Processing Unit (CPU)
4.
Install Expansion Cards
5.
Connect Ribbon Cables, Cabinet Wires, and Power Supply
6.
Setup the BIOS Software
1. Jumpers
1.
Audio Setting (JP1)
This jumper allows you to enable or disable the onboard audio. This is normally
set to enable unless you add an audio expansion card in which case you would
need to disable the onboard audio to prevent hardware conflicts.
P2E-N Onboard Audio Setting
JP1
Audio Enable
JP1
Audio Disable
3
2
1
3
2
1
WARNING!
Computer motherboards, baseboards and components, such as SCSI
cards, contain very delicate Integrated Circuit (IC) chips. To protect them against
damage from static electricity, you should follow some precautions whenever you
work on your computer.
1.
Unplug your computer when working on the inside.
2.
Use a grounded wrist strap before handling computer components. If you do
not have one, touch both of your hands to a safely grounded object or to a
metal object, such as the power supply case.
3.
Hold components by the edges and try not to touch the IC chips, leads or
connectors, or other components.
4.
Place components on a grounded antistatic pad or on the bag that came with
the component whenever the components are separated from the system.
III. INSTALLATION