Asus P3C-LS P3C-LS User Manual - Page 19
Automatic Timeout Reboot Setting JP12
View all Asus P3C-LS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3. HARDWARE SETUP 3) Safe Mode Setting (JP10) Usually Slot 1 processors have locked frequency multiples. In this case, there is no way to exceed the specified multiple whether through motherboard settings or BIOS setup. With unlocked Slot 1 processors, exceeding the specified multiple is possible through BIOS setup. Exceeding the specified multiple may result in hanging during bootup. If this occurs, enable Safe Mode to force a multiple of 2 and 100MHz FSB to enter BIOS setup to correct the problem. Setting Normal Safe Mode JP10 [1-2] (default) [2-3] P3C-LS / L / S JP10 1 23 123 Normal Safe Mode (Default) P3C-LS/L/S Safe Mode Reboot Setting 4) Automatic Timeout Reboot Setting (JP12) The motherboard is set so that when the BIOS detects a hang (timeout) during bootup, the motherboard will automatically reboot. If rebooting is repeating ineffectively, set this jumper to No Reboot to disable auto-reboot. However, if Safe Mode Setting (JP10) is set to Safe Mode, setting Automatic Timeout Reboot Setting (JP12) to No Reboot will bring the system to Safe Mode so you may correct any problem. Setting Normal No Reboot JP12 [1-2] (default) [2-3] 3. H/W SETUP Motherboard Settings P3C-LS / L / S JP12 1 23 123 Normal No Reboot (Default) P3C-LS/L/S Automatic Timeout Reboot Setting ASUS P3C-L / P3C-S / P3C-LS User's Manual 19