Asus P4-P5G41 User Manual - Page 62
Protect Audio Video Path Mode [Disabled]
View all Asus P4-P5G41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Memory Remap Feature [Enabled] Enables or disables the remapping of overlapped PCI memory above the total physical memory. We recommend that you set this item to [Enabled] when you install 4GB memory. Configuration options: [Enabled] [Disabled] DRAM Frequency [Auto] Selects the DRAM frequency. Configuration options: [Auto] [667 MHz] [800 MHz] Configure DRAM Timing by SPD [Enabled] Allows you to enable or disable configurating DRAM Timing by SPD. Configuration options: [Enabled] [Disabled] Initiate Graphic Adapter [PEG/IGD] Allows you to select the primary boot device. Configuration options: [IGD] [PEG/IGD] IGD Graphics Mode Select [Enabled, 32MB] Selects the amount of system memory used by the internal graphics device. Configuration options: [Disabled] [Enabled, 32MB] [Enabled, 64MB] [Enabled, 128MB] DVMT Memory [256MB] Selects the DVMT memory. Configuration options: [128MB] [256MB] [Maximum DVMT] The [Maximum DVMT] option only appears when you install 1GB DDR2 DIMMs into the DIMM sockets. Protect Audio Video Path Mode [Disabled] Sets the Protected Audio Video Path (PAVP). Configuration options: [Disabled] [Lite] [Paranoid] To use the High-Bandwidth Digital Content Protection (HDCP) function, set this option to either [Lite] or [Paranoid]. If you select Paranoid Mode, the system reserves 96MB for playing and storing the decrypted contents. The operation system and other programs cannot use this reserved memory, and Vista Aero (DWM) is disabled. Feature Compressed video buffer is encrypted HW 128-bit AES decryption Protected memory (96MB reserved during boot) PAVP Lite Yes Yes No PAVP Paranoid Yes Yes Yes 4-22 Chapter 4: BIOS setup