Asus P4T P4T User Manual - Page 21
ASUS P4T User's Manual, USB Device Wake-up, USBPWR, NOTES, Setting, USBPWR
View all Asus P4T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
3. HARDWARE SETUP 4) USB Device Wake-up (USBPWR) Set these jumpers to disable or enable the USB device wake-up function. Set this jumper to Enable to use the USB devices to wake up the PC. This feature requires an ATX 12V power supply that supplies at least 2A on the +5VSB lead. The default setting is Disable because not all computers have the appropriate ATX power supply. The computer will not power ON if the jumper is set to Enable without the correct power source. NOTES: 1. This jumper must be set in conjunction with Wake On USB Device in BIOS, 4.5.1 Power Up Control. 2. To support wake up from USB devices, this jumper must be set to Enable. 2. The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal working conditions or in sleep mode. Setting Disable Enable USBPWR [2-3] (default) [1-2] ® P4T P4T USB Device Wake Up USBPWR 12 23 Enable Disable (Default) 3. H/W SETUP Motherboard Settings ASUS P4T User's Manual 21