Asus P4T P4T User Manual - Page 35
ASUS P4T User's Manual, Wake-On-LAN Connector 3-pin WOL, Wake On LAN or PCI Modem, Wake-On-Ring
View all Asus P4T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
3. HARDWARE SETUP 12) Wake-On-LAN Connector (3-pin WOL) This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up the system when a wakeup packet or signal is received through the LAN card. IMPORTANT: This feature requires that Wake On LAN or PCI Modem is enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power. IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power ® WOL Ground P4T P4T Wake-On-LAN Connector PME +5 Volt Standby 13) Wake-On-Ring Connector (2-pin WOR) This connector connects to internal modem cards with a Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, Wake-On-Ring is detected through the COM port. IMPORTANT: This feature requires that Wake On LAN or PCI Modem is enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power. 3. H/W SETUP Connectors ® P4T P4T Wake-On-Ring Connector Ring# Ground 2 1 WOR ASUS P4T User's Manual 35