Asus P4T P4T User Manual - Page 22
System Memory
View all Asus P4T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP 3.5 System Memory This motherboard has two 184-pin Rambus Inline Memory Modules (RIMM) sockets. These sockets support 64Mbit, 128Mbit, and 256Mbit Direct RDRAM technologies. NOTE: No hardware or BIOS setup is required after adding or removing memory. Location RIMMA1 (Rows 0&1) Memory Module RDRAM C-RIMM (Use when socket will not be populated) Subtotal x 1 RIMMA2 (Rows 2&3) RIMMB1 (Rows 4&5) RDRAM x1 C-RIMM (Use when socket will not be populated) RDRAM x 1 RDRAM (Use when socket will not be populated) RIMMB2 (Rows 6&7) RDRAM x1 RDRAM (Use when socket will not be populated) Total System Memory (2GB Max) IMPORTANT 1. The memory configuration of channel A (RIMMA1 and RIMMA2) and channel B (RIMMB1 and RIMMB2) must be identical, (see bellow). 2. C-RIMMS (Continuity RIMM) must be used to complete the sockets that are not populated by RDRAMs. A C-RIMM is necessary to avoid breaking the signal lines, which make serial connection in a Rambus interface, such as used in this motherboard. This assures that the electrical integrity of a Rambus interface. 3. When C-RIMMs are required, it is recommended that they be inserted into RIMMA2 and RIMMB2. a. C-RIMM 128MB RDRAM RIMMB2 RIMMB1 NOTE: When using only two memory C-RIMM RIMMA2 modules, it is recommended that you use 128MB RDRAM RIMMA1 configuration a. b. 128MB RDRAM RIMMB2 C-RIMM RIMMB1 128MB RDRAM C-RIMM RIMMA2 RIMMA1 c. 128MB RDRAM RIMMB2 128MB RDRAM RIMMB1 128MB RDRAM 128MB RDRAM RIMMA2 RIMMA1 22 ASUS P4T User's Manual