Asus PSCH-SR SATA PSCH-SR User Manual English Version - Page 47

ASUS PSCH-SR motherboard, Ultra320 SCSI connector 68-pin SCSIA1, Locator connector 6-pin LOCATOR

Page 47 highlights

11. Ultra320 SCSI connector (68-pin SCSIA1) The Ultra320 SCSI connector is available on SCSI models only. This single channel Ultra320 SCSI connector supports SCSI hard disk drives that you may configure as a RAID set through the onboard Adaptec® 7901 SCSI controller. The channel can support a maximum of 15 devices as specified by Ultra320 SCSI standards. ® PSCH-SR SCSIA1 68-Pin Ultra320 SCSI Connector 34 1 68 35 PSCH-SR Onboard SCSI Connector If you wish to create a SCSI RAID set, make sure that you have connected the SCSI cable and installed SCSI devices. 12. Locator connector (6-pin LOCATOR) This connector controls the locator LEDs in the system front or rear panel. By default, this connector comes without a jumper. ® PSCH-SR LOCATOR LOCATORLED1+ LOCATORLED1LOCATORBTN#+ GND LOCATORLED2LOCATORLED2+ PSCH-SR LOCATOR Connector ASUS PSCH-SR motherboard 2-29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102

ASUS PSCH-SR motherboard
2-29
PSCH-SR
PSCH-SR Onboard SCSI Connector
35
68
34
1
SCSIA1
68-Pin Ultra320 SCSI Connector
11. Ultra320 SCSI connector (68-pin SCSIA1)
12. Locator connector (6-pin LOCATOR)
This connector controls the locator LEDs in the system front or rear
panel. By default, this connector comes without a jumper.
The Ultra320 SCSI connector is available on SCSI models only.
This single channel Ultra320 SCSI connector supports SCSI hard disk
drives that you may configure as a RAID set through the onboard
Adaptec
®
7901 SCSI controller. The channel can support a maximum
of 15 devices as specified by Ultra320 SCSI standards.
If you wish to create a SCSI RAID set, make sure that you have
connected the SCSI cable and installed SCSI devices.
PSCH-SR
PSCH-SR LOCATOR Connector
LOCATOR
LOCATORLED1+
LOCATORLED1-
LOCATORBTN#+
GND
LOCATORLED2-
LOCATORLED2+