Asus ROG CROSSHAIR X670E EXTREME ROG CROSSHAIR X670E Series BIOS manual Englis - Page 20

Calibrated Temperature Threshold to switch back Set this threshold to control when the CPU returns to default mode. When CPU Calibrated Temperature is bigger than this threshold, CPU returns to default. Likewise, when temperature is smaller than this threshold AND current is bigger than Current Threshold, CPU slips into OC Mode. In Celsius Unit. Configuration options: [Auto] [0] - [140] Hysteresis Higher numbers increase the time required to persist in state when crossing thresholds before switching. Set to 0 for fastest reaction and increase this to require longer times to remain said state before activation. Configuration options: [Auto] [0] - [255] DRAM Timing Control The sub-items in this menu allow you to set the DRAM timing control features. Use the and keys to adjust the value. To restore the default setting, type [Auto] using the keyboard and press the key. You can also select various Memory Presets to load settings suitably tuned for some memory modules. Changing the values in this menu may cause the system to become unstable! If this happens, revert to the default settings. Primary Timings DRAM CAS# Latency Configuration options: [Auto] [2] - [64] DRAM RAS# to CAS# Delay Configuration options: [Auto] [1] - [63] DRAM RAS# PRE Time Configuration options: [Auto] [1] - [63] DRAM RAS# ACT Time Configuration options: [Auto] [1] - [127] Secondary Timings DRAM Row Cycle Time Configuration options: [Auto] [1] - [255] DRAM WRITE to READ Delay Configuration options: [Auto] [2] - [126] DRAM REF Cycle Time Configuration options: [Auto] [1] - [4095] Trfc2 Configuration options: [Auto] [1] - [4095] Trfcsb Configuration options: [Auto] [1] - [2047] DRAM READ to PRE Time Configuration options: [Auto] [1] - [31] 20 ROG CROSSHAIR X670E Series BIOS Manual