Asus ROG CROSSHAIR X670E EXTREME ROG CROSSHAIR X670E Series BIOS manual Englis - Page 45
APM Configuration, SATA6G, SATA6G Hot Plug, Restore AC Power Loss, ErP Ready, Max Power Saving
View all Asus ROG CROSSHAIR X670E EXTREME manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
The following items appear only when SATA Mode is set to [AHCI]. SATA6G Allows you to enable or disable the selected SATA port. Configuration options: [Disabled] [Enabled] SATA6G Hot Plug Designates this port as Hot Pluggable. Configuration options: [Disabled] [Enabled] 6.10 APM Configuration The items in this menu allow you to change the advanced power management settings. Restore AC Power Loss Allows your system to go to ON state, OFF state, or both states after an AC power loss. When setting your system to [Last State], it goes to the previous state before the AC power loss. Configuration options: [Power Off] [Power On] [Last State] ErP Ready Allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off. RGB LEDs and RGB/Addressable RGB Headers will also be disabled. Configuration options: [Disabled] [Enabled (S4+S5)] [Enabled (S5)] Max Power Saving Configuration options: [Disabled] [Enabled] Power On By PCI-E Allows you to enable or disable the Wake-on-LAN function of the onboard LAN controller or other installed PCI-E LAN cards. Configuration options: [Disabled] [Enabled] ROG CROSSHAIR X670E Series BIOS Manual 45