Asus S-presso Spresso Hardware User Manual - Page 84
Removable Drives, Boot Settings Configuration
View all Asus S-presso manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
4.6.2 Removable Drives Removable Drives 1st Drive [1st Floppy Drive] Specifies the boot sequence from the available devices. 1st ~ xxth Drive [1st Floppy Drive] These items specify the boot sequence from the available removable drives. The number of drives that appear on the screen depends on the the number of devices installed in the system. Configuration options: [xxxxx Drive] [Disabled] 4.6.3 Boot Settings Configuration Boot Settings Configuration Quick Boot Full Screen Logo Add On ROM Display Mode Bootup Num-Lock PS/2 Mouse Support Typematic Rate Boot to OS/2 Wait for 'F1' If Error Hit 'DEL' Message Display Interrupt 19 Capture [Enabled] [Enabled] [Force BIOS] [On] [Auto] [Fast] [No] [Enabled] [Enabled] [Disabled] Allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system. Quick Boot [Enabled] Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items. Configuration options: [Disabled] [Enabled] Full Screen Logo [Enabled] This allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled] Make sure that the Full Screen Logo item is set to [Enabled] if you want to use the ASUS MyLogo2™ feature. 4-30 Chapter 4: BIOS information