Asus TUWE-M TUWE-M User Manual - Page 57

4. BIOS SETUP SDRAM Page Closing Policy [One Bank] This feature controls that after a page miss whether the Graphics and Memory Controller Hub (GMCH) will issue "precharge only the bank" or "precharge all" command to a specific opened SDRAM bank. Configuration options: [One Bank] [All Banks] CPU Latency Timer [Enabled] This controls the GMCH's response to CPU deferrable cycles. Configuration options: [Disabled] [Enabled] Onboard VGA [Enabled] Select to enable the PCI channel for onboard VGA cards. Configuration options: [Disabled] [Enabled] Graphics Window Size [64MB] This feature allows you to select the size of mapped memory for AGP graphic data. Configuration options: [64MB] [32MB] Memory Hole At 15M-16M [Disabled] This field allows you to reserve an address space for ISA devices that require it. Configuration options: [Disabled] [Enabled] PCI 2.1 Support [Enabled] This function allows you to enable or disable PCI 2.1 features including passive release and delayed transaction. Configuration options: [Disabled] [Enabled] High Priority PCI Mode [Disabled] This field allows you to give PCI slot 1 a higher priority. You may want to enable this setting if you are using an IEEE-1394 PCI card. Configuration options: [Disabled] [Enabled] Onboard PCI IDE Enable [Both] You can select to enable the primary IDE channel, secondary IDE channel, both, or disable both channels. Configuration options: [Both] [Primary] [Secondary] [Disabled] Onboard LAN Controller [Enabled] You can select to enable or disable the Intel LAN controller. Choose [Disable] if a PCI LAN card is used. Configuration options: [Enabled] [Disabled] 4. BIOS SETUP Chip Configuration ASUS TUWE-M User's Manual 57