Home » Asus Manuals » Motherboards » Asus X99-E-10G WS » Manual Viewer

Asus X99-E-10G WS X99-E-10G WS User Guide for English. - Page 124

Chassis Fan 1-2 Q-Fan Control [Auto], Chassis Fan 1-2 Fan Speed Low Limit [200 RPM]

Add to My Manuals
Save this manual to your list of manuals

Page 124 highlights

CPU Fan Middle Duty Cycle(%) Use the or keys to adjust the CPU fan middle duty cycle. The values range from 20% to 100%. CPU Lower Temperature Use the or keys to adjust the lower limit of the CPU temperature. The values range from 20°C to 75°C. The CPU fan will operate at the minimum duty cycle when the CPU temperature is lower than the limit. CPU Fan Min. Duty Cycle(%) Use the and keys to adjust the minimum CPU fan duty cycle. The values range from 20% to 100%. When the CPU temperature is lower than the lower limit, the CPU fan will operate at the minimum duty cycle. Chassis Fan 1-2 Q-Fan Control [Auto] [Disabled] Disable the Chassis Q-Fan control feature. [Auto] Detect the type of Chassis Q-Fan installed and automatically switches the mode control. [DC mode] Enable the Chassis Q-Fan control in DC mode for 3-pin chassis fan. [PWM mode] Enable the Chassis Q-Fan control in PWM mode for 4-pin chassis fan. The following items appear only when you set the Chassis Fan 1-2 Q-Fan Control to [Auto], [PWM Mode], and [DC Mode]. Chassis Fan 1-2 Q-Fan Source [CPU] The assignment fan will be controlled according to the selected temperature source. Configuration options: [CPU] [MotherBoard] [PCIEX16_1 Slot] [PCIEX16_3 Slot] [VRM] [PCH] [T_SENSOR1] [EXT_Sensor1] [EXT_Sensor2] [EXT_Sensor3] [Multiple Sources] • For EXT_Sensor1-3, connect a Thermistor cable to the EXT_TS1-3 header then place the other end to the component to get the temperature. • For Multiple Sources, select up to three temperature sources and the fan will automatically change based on the highest temperature. • ASUS FAN EXTENSION CARD is required to configure these items. Chassis Fan 1-2 Step Up [0 sec] This item allows you to set the value of the chassis fan step up. Configuration options: [0 sec] [12 sec] [25 sec] [51 sec] [76 sec] [102 sec] [127 sec] [153 sec] [178 sec] [204 sec] Chassis Fan 1-2 Step Down [0 sec] This item allows you to set the value of the chassis fan fan step down. Configuration options: [0 sec] [12 sec] [25 sec] [51 sec] [76 sec] [102 sec] [127 sec] [153 sec] [178 sec] [204 sec] Chassis Fan 1-2 Fan Speed Low Limit [200 RPM] This item allows you to disable or set the chassis fan warning speed. Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM] Chapter 3 3-54 Chapter 3: BIOS Setup

Section	Page
Safety information	7
About this guide	8
Conventions used in this guide	9
Typography	9
X99-E-10G WS specifications summary	10
Package contents	15
Installation tools and components	16
Chapter 1: Product Introduction	17
1.1 Special features	17
1.1.1 Product highlights	17
1.1.2 Other special features	18
1.2 Motherboard overview	19
1.2.1 Before you proceed	19
1.2.2 Motherboard layout	20
1.2.3 Central Processing Unit (CPU)	22
1.2.4 System memory	23
1.2.5 Expansion slots	25
1.2.6 Onboard buttons and switches	28
1.2.7 Jumpers	32
1.2.8 Onboard LEDs	33
1.2.9 Internal connectors	40
Chapter 2: Basic Installation	53
2.1 Building your PC system	53
2.1.1 Motherboard installation	53
2.1.2 CPU installation	55
2.1.3 CPU heatsink and fan assembly installation	57
2.1.4 DIMM installation	58
2.1.5 ATX Power connection	59
2.1.6 SATA device connection	60
2.1.7 Front I/O Connector	61
2.1.8 Expansion Card installation	62
2.2 BIOS update utility	63
2.3 Motherboard rear and audio connections	65
2.3.1 Rear I/O connection	65
2.3.2 Audio I/O connections	67
2.4 Starting up for the first time	69
2.5 Turning off the computer	70
Chapter 3: BIOS Setup	71
3.1 Knowing BIOS	71
3.2 BIOS setup program	72
3.2.1 EZ Mode	73
3.2.2 Advanced Mode	74
3.2.3 QFan Control	77
3.2.4 EZ Tuning Wizard	79
3.3 My Favorites	82
3.4 Main menu	84
3.5 Ai Tweaker menu	86
3.6 Advanced menu	105
3.6.1 CPU Configuration	106
3.6.2 PCH Configuration	108
3.6.3 PCH Storage Configuration	109
3.6.4 System Agent Configuration	111
3.6.5 USB Configuration	114
3.6.6 Platform Misc Configuration	115
3.6.7 Onboard Devices Configuration	116
3.6.8 APM Configuration	118
3.6.9 Network Stack Configuration	119
3.6.10 HDD/SDD SMART Information	119
3.6.11 Intel(R) Ethernet Controller - 00:1E:99:00:01:1B	120
3.6.12 Intel(R) Ethernet Controller - 00:1E:99:00:01:1C	121
3.7 Monitor menu	122
3.8 Boot menu	129
3.9 Tool menu	134
3.9.1 GPU Post	134
3.9.2 ASUS EZ Flash 3 Utility	134
3.9.3 Secure Erase	134
3.9.4 ASUS Overclocking Profile	136
3.9.5 ASUS SPD Information	137
3.10 Exit menu	138
3.11 Updating BIOS	139
3.11.1 EZ Update	139
3.11.2 ASUS EZ Flash 3	140
3.11.3 ASUS CrashFree BIOS 3	142
Chapter 4: Software Support	143
4.1 Installing an operating system	143
4.2 Support DVD information	143
4.2.1 Running the support DVD	143
4.2.2 Obtaining the software manuals	144
4.3 Software information	145
4.4 AI Suite 3	145
4.4.1 Dual Intelligent Processors 5	149
4.4.2 TPU (Turbo Processing Unit)	150
4.4.3 Turbo App	151
4.4.4 EPU (Energy Processing Unit)	152
4.4.5 Fan Xpert 4	153
4.4.6 PC Cleaner	154
4.4.7 DIGI+ Power Control	155
4.4.8 Ai Charger+	157
4.4.9 USB 3.1 Boost	158
4.4.10 EZ Update	159
4.4.11 System Information	160
4.4.12 Mobo Connect	161
4.4.13 USB BIOS Flashback	162
4.4.14 Push Notice	164
4.5 Audio configurations	167
Chapter 5: RAID Support	169
5.1 RAID configurations	169
5.1.1 RAID definitions	169
5.1.2 Installing Serial ATA hard disks	170
5.1.3 Intel® Rapid Storage Technology in UEFI BIOS	170
5.1.4 Intel® Rapid Storage Technology Option ROM utility	171
5.2 Creating a RAID driver disk	175
5.2.1 Creating a RAID driver disk in Windows®	175
Chapter 6: Multi GPU Support	177
6.1 AMD® CrossFireX™ technology	177
6.1.1 Requirements	177
6.1.2 Before you begin	177
6.1.3 Installing two CrossFireX™ graphics cards	178
6.1.4 Installing three CrossFireX™ graphics cards	179
6.1.5 Installing four CrossFireX™ graphics cards	180
6.1.6 Installing the device drivers	181
6.1.7 Enabling the AMD® CrossFireX™ technology	181
6.2 NVIDIA® SLI® technology	183
6.2.1 Requirements	183
6.2.2 Installing two SLI-ready graphics cards	183
6.2.3 Installing three SLI-ready graphics cards	184
6.2.4 Installing four SLI-ready graphics cards	185
6.2.5 Installing the device drivers	186
6.2.6 Enabling the NVIDIA® SLI® technology	186
Appendix	189
X99-E-10G WS block diagram	189
Notices	190

Match case Limit results 1 per page

3-54

Chapter 3: BIOS Setup

Chapter 3

CPU Fan Middle Duty Cycle(%)

Use the <+> or <-> keys to adjust the CPU fan middle duty cycle. The

values range from 20% to 100%.

CPU Lower Temperature

Use the <+> or <-> keys to adjust the lower limit of the CPU temperature.

The values range from 20°C to 75°C. The CPU fan will operate at the

minimum duty cycle when the CPU temperature is lower than the limit.

CPU Fan Min. Duty Cycle(%)

Use the <+> and <-> keys to adjust the minimum CPU fan duty cycle. The

values range from 20% to 100%. When the CPU temperature is lower than

the lower limit, the CPU fan will operate at the minimum duty cycle.

Chassis Fan 1-2 Q-Fan Control [Auto]

[Disabled]

Disable the Chassis Q-Fan control feature.

[Auto]

Detect the type of Chassis Q-Fan installed and automatically switches the

mode control.

[DC mode]

Enable the Chassis Q-Fan control in DC mode for 3-pin chassis fan.

[PWM mode]

Enable the Chassis Q-Fan control in PWM mode for 4-pin chassis fan.

The following items appear only when you set the Chassis Fan 1-2 Q-Fan Control to

[Auto]

[PWM Mode]

and

[DC Mode]

Chassis Fan 1-2 Q-Fan Source [CPU]

The assignment fan will be controlled according to the selected temperature source.

Conﬁguration options: [CPU] [MotherBoard] [PCIEX16_1 Slot] [PCIEX16_3 Slot]

[VRM] [PCH] [T_SENSOR1] [EXT_Sensor1] [EXT_Sensor2] [EXT_Sensor3] [Multiple

Sources]

•

For EXT_Sensor1-3, connect a Thermistor cable to the EXT_TS1-3 header then place

the other end to the component to get the temperature.

•

For Multiple Sources, select up to three temperature sources and the fan will

automatically change based on the highest temperature.

•

ASUS FAN EXTENSION CARD is required to conﬁgure these items.

Chassis Fan 1-2 Step Up [0 sec]

This item allows you to set the value of the chassis fan step up.

Conﬁguration options: [0 sec] [12 sec] [25 sec] [51 sec] [76 sec] [102 sec] [127 sec]

[153 sec] [178 sec] [204 sec]

Chassis Fan 1-2 Step Down [0 sec]

This item allows you to set the value of the chassis fan fan step down.

Conﬁguration options: [0 sec] [12 sec] [25 sec] [51 sec] [76 sec] [102 sec] [127 sec]

[153 sec] [178 sec] [204 sec]

Chassis Fan 1-2 Fan Speed Low Limit [200 RPM]

This item allows you to disable or set the chassis fan warning speed.

Conﬁguration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]