Asus X99-E-10G WS X99-E-10G WS User Guide for English. - Page 96
External Digi+ Power Control, Attempt Fast Cold Boot [Auto]
View all Asus X99-E-10G WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
DRAM Training MemTest [Auto] This item allows you to enable or disable the memory testing. Configuration options: [Auto] [Disabled] [Enabled] Attempt Fast Boot [Auto] This item allows the portion of the memory reference code to be skipped when possible to increase boot speed. Configuration options: [Auto] [Disabled] [Enabled] Attempt Fast Cold Boot [Auto] This item allows the portion of the memory reference code to be skipped when possible to increase boot speed. Configuration options: [Auto] [Disabled] [Enabled] DRAM Training [Auto] [Auto] System automatically sets the status according to the installed DRAM. [Ignore] System ignores the DRAM training test function. [Enabled] System closes the DRAM channel when it has some issues. [Smart] System automatically trains the DRAM for better stability. DRAM SPD Write [Disabled] For advanced programming only. Enable DRAM SPD write to enable memory SMBus programming Configuration options: [Disabled] [Enabled] External Digi+ Power Control CPU Load-line Calibration [Auto] Load-line is defined by Intel® specification and affects CPU power voltage. The CPU working voltage decreases proportionally to CPU loading. Higher load-line calibration could get higher voltage and good overclocking performance, but increases the CPU and VRM thermal conditions. Select from levels 1 to 9 to adjust the CPU power voltage from 0% to 125%. Configuration options [Auto] [Level 1] - [Level 9] The actual performance boost may vary depending on your CPU specification. DO NOT remove the thermal module. The thermal conditions should be monitored. CPU VRM Switching Frequency [Auto] This item affects the VRM transient response speed and the component thermal production. Select [Manual] to configure a higher frequency for a quicker transient response speed. Configuration options: [Auto] [Manual] DO NOT remove the thermal module. The thermal conditions should be monitored. Chapter 3 3-26 Chapter 3: BIOS Setup