Beko HII64430GT User Manual - Page 11
folln\Aiing
View all Beko HII64430GT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
If the board is below: It is required to leave a ventilation opening of minimum 180 cm2 at the rear section of the furniture as illustrated in the folln\Aiing figure, 5. Place the hob on the counter and align it. 6. When the hob is placed on the counter top it will be fixed easily with the help of the clamps. If the installation with this clamps are not in appropriate for your cooktop, additional 2 mounting clamps can be fixed to the front side of the product as shown in the below figure. 40 min. During installation of your induction hob, place the product parallel to the installation surface. Also, apply sealing gasket to the parts of the hob contacting the counter as described below in order to prevent any liquid from penetrating between the product and the counter. 1. Prepare the surface of the counter as shown in the figure. 2. Turning the hob upside down, place it on a flat surface. 3. The sealing gasket provided in the package must be applied on the lower casing bend around the hob as shown in the figure, during installation of the hob. 1 Hob 2 Installation clamp 3 Counter When installing the hob onto a cabinet, a shelf must be installed in order to separate the cabinet from the hob as illustrated in the above figure. This is not required when installing onto a built-under oven. For example, if it is possible to touch the bottom of the product since it is installed onto a drawer, this section must he covered with a wooden plate. 4. Fix the mounting springs inserting and screwing them through the holes of the bottom case as shown in the figure. min. 15 mm 11/EN