Beko HII64430GT User Manual - Page 18
overflowing.
View all Beko HII64430GT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
zones at the same side should be used. This usage style provides more cooking and pan detection performance. You can see in figure below the recommended usage style to use two cooking zone at the same time. 4 2 If the right and left cooking zones of hob operates at the same time, the cooking zones operate discontinuously. Therefore the cooking and pan detection performance decrease. Over Heating Protection There are some sensors inside your hob in order to provide over heating protection. Below responses may arise in an over heating condition: • The running hotplate can be turned off. • Selected level can be decreased. (But it is not indicated on the display.) Safety system against overflow Your hob is equipped with a safety system against overflowing. If any overflowing occurs on the control panel for any reason, the system automatically cuts the power connection to turn your hob off. Meantime, "F" appears on the touch -display. Residual heat indicator The induction hob may get hot after the cooking process because of the pan left on the hotplate. Until the glass table on the hob section drops down to a safe temperature, "H" will be displayed on the control panel. "Do not touch the related sections until "H" disappears. Temperature display does not light up and worn the user anymore during a power failure. Sensitive power setting Because of its operating principle, induction hob responds to the commands immediately. They change the power settings in a quick way. Thus, you may prevent a cooking dish (water, milk) from overflowing by turning off the appliance. 1 8/EN Automatic Cooking and High Power (Booster) Automatic cooking function makes cooking easier. If the Automatic Cooking is active, the hotplate will be operated with maximum power for a period of time (see Table -2). Quick heating time depends on the selected heat level. This is indicated through a flashing "A" alternating with the heat setting value (e.g. half second "A" and half second "9") in the hotplate display. At the end of the quick heating time, hob will return to the normal heating mode for the selected level and "A" will disappear. All hotplates are equipped with Quick Heating function. The below table contains the automatic heating times for different heating levels. Table-2: Quick heating times in automatic cooking Temperature level Quick Heating Time of Operation - (second) 1 10 2 30 3 47 4 65 5 85 6 25 7 35 8 45 9 10 Turning On the Automatic Cooking Feature: 1. Turn on the hob. 2. Select desired hotplate by touching hotplate selection keys. 3. "N., " key to switch the heat value of the hotplate to the desired level. "9" and "A" will be displayed on the screen respectively. This means heat setting value "9" and Quick Heating feature is active now. 4. Quick heating function of the level to be selected is determined with """ or "u" keys. 5. The specified Quick Heating function operates for the period according to the cooking level in table 2 and reverts back to its level after the time elapses. (For example, this period is 25 minutes for level 6) Turning Off the Automatic Cooking Feature: • The Automatic Cooking function can be turned off early by decreasing the heat setting to "0". • Automatic Cooking is not active anymore when the period in table 2 is over. High Power (Booster) You can use high power level to heat your hob faster. But, it is not recommended to cook in this position for too long.