Belkin F5D7230-4_V4000 User Guide - Page 19
Step 1, Hardware Connections - Follow the Quick Installation, Guide QIG
View all Belkin F5D7230-4_V4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Connecting and Configuring your Router section 1 Step 1 Hardware Connections - Follow the Quick Installation Guide (QIG) 2 A. Unplug your modem's power cord. Put the Router next to 3 the modem. Raise the Router's antennas. 4 B. Locate the networking cable that connects your modem and 5 computer. Unplug that cable from your modem, and plug it into any gray port on the back 6 of the Router. 7 C. Find your new networking cable (included in the box with your Router) and connect it to the 8 yellow port on the back of the Router and connect the other end to your modem. 9 10 D. Plug in your modem's power cord. Wait 60 seconds for the modem to start up. Plug the Router's power supply into the black power jack on the back of the Router. Plug the other end into the wall outlet. FRPSXWHU E. Wait 20 seconds for the Router to start up. Look at the display on the front of the Router. The light that corresponds to the numbered port connected to your computer should be lit if your computer is connected properly. Also, check that the "modem" icon is lit up to verify that it is properly connected to the modem. If they are not, recheck your connections. 15