Brother International 8250P Service Manual - Page 133
TEL/POLLING key, This setting is effective only for those models having a programmable key.
View all Brother International 8250P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Selector No. 1 2 3 4 5 6 7 8 WSW27 (Function setting 5) Function Definition of programmable key Ringer OFF setting Automatic playback of OGM at the start time of OGM ON mode Detection of distinctive ringing pattern Not used. Recording quality level Sampling rate when the recording quality level is set to High Toner save mode Setting and Specifications 0: TEL key 1: TEL/POLLING key 0: Yes 1: No 0: No 1: Yes 0: Yes 1: No 0: Normal 1: High 0: Short 1: Long 0: Yes 1: No NOTE: Selector 1 is not applicable to the U.S.A. versions. NOTE: Selectors 3, 6 and 7 are applicable to those models equipped with a built-in TAD. l Selector 1: Definition of programmable key This selector defines a programmable key as a TEL key or TEL/POLLING key. Setting this selector to "1" allows the programmable key to function as either a TEL or POLLING key if pressed when the handset is off or on the hook, respectively. This setting is effective only for those models having a programmable key. l Selector 2: Ringer OFF setting This selector determines whether or not the ringer can be set to OFF. l Selector 3: Automatic playback of OGM at the start time of OGM ON mode This selector determines whether or not the equipment automatically plays back an OGM the moment it switches to the OGM ON mode in the MC mode. l Selector 4: Detection of distinctive ringing pattern If this selector is set to "1" the equipment detects only the number of rings; if it is set to "0" the equipment detects the number of rings and the ringing time length to compare the detected ringing pattern with the registered distinctive one. l Selector 6: Recording quality level This selector determines the recording quality level (this function can be accessed also by the user function 8-8). If it is set to "0" (Normal), the sampling rate specified by selector 4 of WSW30 takes effect; if it is set to "1" (High), the sampling rate by selector 7 of WSW27 takes effect. l Selector 7: Sampling rate when the recording quality level is set to Normal This selector determines the sampling rate when selector 6 of WSW27 is set to "1" (High). If this selector is set to "0," the sampling rate is 9.6 kbps; if it is set to "1," the sampling rate is 8.8 kbps. V - 40