Brother International 8250P Service Manual - Page 84
Slightly lift up the NCU bracket which holds the NCU PCB and then disconnect the NCU
![]() |
View all Brother International 8250P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
1.20 NCU PCB (1) Make sure that the MJ cover, low-voltage power supply PCB and gear drive unit are removed. (2) Remove the screw from the NCU bracket. (3) Slightly lift up the NCU bracket (which holds the NCU PCB) and then disconnect the NCU harness from the NCU PCB. (* Provided on the European, Australian, Indonesian, and Asian versions.) IV - 40
![](/manual_guide/products/brother-international-mfc-9050-service-manual-c68f5f0/84.png)
IV
- 40
1.20
NCU PCB
(1)
Make sure that the MJ cover, low-voltage power supply PCB and gear drive unit are removed.
(2)
Remove the screw from the NCU bracket.
(3)
Slightly lift up the NCU bracket (which holds the NCU PCB) and then disconnect the NCU
harness from the NCU PCB.
(* Provided on the European, Australian, Indonesian, and Asian versions.)